Contents
Kinematic and Dynamic Modelling
There are numerous ways to describe a robot's kinematics and dynamics. In the ROS community, a few standards have arisen which may be unified in the future:
URDF Universal Robot Description Format defines:
- Kinematic joint-link trees,
- Link inertia,
- Joint friction,
- Joint safety limits,
- Actuators,
Can be extended with custom elements.
SDF Simulation Description Format used in Gazebo:
Describes similar information to URDF, but with a different format used in the Gazebo Simulator.
SRDF Semantic Robot Description Format describes elements of URDF including:
- Higher-level information,
- Specific joint-space configurations,
- Groups of joints,
- End-effectors.
Runtime Diagnostics
Diagnostics standards for robots have been formalized in REP-0107.
Use /diagnostics to publish hardware diagnostics data from every device driver.
Use diagnostic_aggregator to collect and group diagnostics data on any significant system.
The /diagnostics Topic
To begin with, it is best practice to set up diagnostics on all robot hardware at a minimum. Most of the drivers included with ROS include some form of diagnostics messages. The ROS diagnostics toolchain is not a computation graph level concept (like parameters, nodes, or topics), but is instead built on top of the /diagnostics topic.
Hardware drivers publish to the /diagnostics topic a diagnostic_msgs/DiagnosticArray message, which contains a header (sequence number, timestamp, and frame_id) and an array of diagnostic_msgs/DiagnosticStatus messages.
The DiagnosticStatus message contains:
byte level : One of three states (OK, WARN, ERROR), which represents the overall hardware health.
string name : The name of the device this DiagnosticStatus represents
string hardware_id : A unique hardware identifier, possibly a serial number or UUID
diagnostic_msgs/KeyValue[] : An array of key/value pairs used to represent any additional pertinent information about the sensor. (For example "temperature":"35C", "frequency:100Hz", "voltage:24V")
Any node subscribing to this /diagnostics topic will receive the raw diagnostics messages (which can be overwhelming on a large system like the PR2).
To visualize raw diagnostics messages in ROS, you can currently use the runtime_monitor by simply running:
rosrun runtime_monitor montior
The diagnostic_updater
The diagnostic_updater is not quite relevant to the aggregator, but is an often-overlooked tool. It provides convenience functions for working with the DiagnosticArray messages with your hardware drivers in C++.
With the diagnostic_updater libraries, you can create an object for interacting with DiagnosticArray messgaes, as well as monitoring frequency status, and over/under monitoring for critical values in your hardware device (temperature, voltage, etc).
This was mainly included in this write-up so that no one tries to reinvent what is already written.
The Diagnostic Aggregator
diagnostic_aggregator is a package for aggregating and analyzing diagnostics data.
Assuming that you have a working robotic system publishing raw diagnostic data to /diagnostics, you will see that the raw data accumulates quickly, and becomes cumbersome to actually sort through. For this reason, we use the diagnostic_aggregator. It allows us to group and sort data into namespaces (much like the ROS computational graph). It will also rate-limit the aggregated diagnostics output to ~pub_rate (typically 1 Hz).
From the wiki page, this can transform something like:
Left Wheel Right Wheel SICK Frequency SICK Temperature SICK Connection Status Stereo Left Camera Stereo Right Camera Stereo Analysis Stereo Connection Status Battery 1 Level Battery 2 Level Battery 3 Level Battery 4 Level Voltage Status
Into something that is more readable, like:
My Robot/Wheels/Left My Robot/Wheels/Right My Robot/SICK/Frequency My Robot/SICK/Temperature My Robot/SICK/Connection Status My Robot/Stereo/Left Camera My Robot/Stereo/Right Camera My Robot/Stereo/Analysis My Robot/Stereo/Connection Status My Robot/Power System/Battery 1 Level My Robot/Power System/Battery 2 Level My Robot/Power System/Battery 3 Level My Robot/Power System/Battery 4 Level My Robot/Power System/Voltage Status
Additionally, each group is given a level, which allows you to quickly see at-a-glance, where the errors are on your machine. ERROR and WARN propagates up the tree. For instance, an ERROR on "Left" propagates up to an ERROR on "Wheels", and an ERROR on "My Robot".
This can then be inspected using the robot_monitor tool.
Why Should I Use This?
Using /diagnostics is best practice on a robotic system of any scale. It makes troubleshooting hardware (and software) easier in almost all cases.
Using /diagnostics_agg is good practice on any larger robotic system. It is also good practice on any sort of production system, as it allows more flexibility and clarity when looking at diagnostics data.
Additionally, if the system is already set up to use aggregated diagnostics, the user may choose to write additional analyzer plugins for their system, further customizing diagnostic analysis.
Helpful Resources
- diagnostics
- robot_monitor
- runtime_monitor
- microstrain_3dmgx2_imu - A node that publishes good diagnostics data
- pr2_analyzers.yaml - A good example of setting up analyzers for use with diagnostic_aggregator
Multi-Robot Patterns
How to setup ROS for multi-robot domains (how many roscores, namespaces for nodes, tf frames)
