Gentoo Linux Installation Instructions

SVN Based Install (download-and-compile)

Setup

sudo mkdir -p /etc/portage
sudo bash -c 'echo app-portage/gentoolkit >> /etc/portage/package.keywords'
sudo bash -c 'echo dev-python/setuptools >> /etc/portage/package.keywords'
sudo emerge -u pyyaml cmake subversion hgsubversion gentoolkit setuptools

rosinstall

The following lines will download the ROS source code using the rosinstall tool, and bootstrap the installation. The installation downloads all ROS stacks in subdirectories inside the ~/ros directory, one subdirectory for each stack in the rosinstall file.

First install rosinstall:

  • sudo easy_install -U rosinstall

Then use rosinstall to download your preferred C-Turtle variant:

  • ROS-only: Includes basic ROS and tutorials.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=ros_only&overlay=no"

    Base Install: ROS plus robot-generic stacks (e.g. navigation, visualization)

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=base&overlay=no"

    PR2 Install: ROS plus PR2-specific stacks, including PR2 simulator.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=pr2&overlay=no"

    PR2 All Install: ROS plus PR2 and bleeding edge research/experimental stacks.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=pr2all&overlay=no"

NOTE: the instructions above download all stacks inside the ~/ros folder. If you prefer a different location, simply change the ~/ros in the commands above.

Environment Setup

Shell language:   Bash     Zsh    

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.bash

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.bash" >> ~/.bashrc
. ~/.bashrc

For Zsh users, change the last line of ~/ros/setup.zsh to

source $ROS_ROOT/tools/rosbash/roszsh

before running source ~/ros/setup.zsh Similarly, have the setup script called at the start of each new shell session with

echo "source ~/ros/setup.zsh" >> ~/.zshrc
. ~/.zshrc

Tutorials

Now, to test your installation, please proceed to the ROS Tutorials.

Wiki: cturtle/Installation/Gentoo (last edited 2015-09-22 21:45:50 by VincentRabaud)