About | Support | answers.ros.org	Search:

camera_drivers_experimental: camera1394 | camera_info_manager | libdc1394v2 | sr4k

Package Summary

This is a port of the older ROS driver for SR3K that used the libusb API. This driver uses the newer libmesasr API (>= 1.0) that can be found at http://www.mesa-imaging.ch/drivers.php. This node is designed to work with the ROS image_pipeline with minimal dependencies. Note: A compile time flag at the top of include/sr4k.h is currently used to switch back and forth between supporting SR3000 and SR4000 devices.

• Author: Patrick Beeson, Radu Rusu
• License: BSD
• Repository: cornell-ros-pkg
• Source: svn http://cornell-ros-pkg.googlecode.com/svn/trunk/bumblebee2/camera_drivers_experimental/sr4k

ROS API

sr4k

The sr4k driver provides a ROS interface for Mesa Imaging SwissRanger devices (3000/4000) that use the libmesasr libraries.

Published Topics

camera/camera_info (sensor_msgs/CameraInfo)

• Camera intrinsics for published images

distance/image_raw (sensor_msgs/Image)

• 2D depth image

intensity/image_raw (sensor_msgs/Image)

• 2D intensity image that corresponds to the depth image of distance/image_raw

pointcloud/cloud_raw (sensor_msgs/PointCloud)

• 3D pointcloud generated from distance/image_raw

Services

camera/set_camera_info (sensor_msgs/SetCameraInfo)

• Sets the camera's calibration

Parameters

Initial Parameters

These parameters only affect the driver when it starts.

frame_id (str, default: node name)

• Frame of reference ID for coordinate transforms

auto_exposure (int, default: 1)

• -1 leaves in current state; 0 turns off auto exposure; 1 turns it on.

integration_time (int, default: -1)

• Sets integration time [SR3k:(integration_time+1)*0.200 ms; SR4k 0.300ms+(integration_time)*0.100 ms]. -1 leaves in current state; should not be used with auto_exposure.

modulation_freq (int, default: -1)

• Set modulation frequency. -1 leaves in current state (which on power up, is the FACTORY CALIBRATED state -- you probably want this one); 0 == 40MHz, SR3k: maximal range 3.75m; 1 == 30MHz, SR3k, SR4k: maximal range 5m; 2 == 21MHz, SR3k: maximal range 7.14m; 3 == 20MHz, SR3k: maximal range 7.5m; 4 == 19MHz, SR3k: maximal range 7.89m; 5 == 60MHz, SR4k: maximal range 2.5m; 6 == 15MHz, SR4k: maximal range 10m; 7 == 10MHz, SR4k: maximal range 15m; 8 == 29MHz, SR4k: maximal range 5.17m; 9 == 31MHz, SR4k: maximal range 4.84m; 10 == 14.5MHz, SR4k: maximal range 10.34m; 11 == 15.5MHz, SR4k: maximal range 9.68m

amp_threshold (int, default: -1)

• Sets measurements with amplitude values less than this threshold to 0.

Reconfigurable Parameters

Currently no reconfigurable parameters.

Calibration Parameters

camera_info_manager/url (str, default: "")

• URL for loading and storing calibration data in the form file:///path/to/local/calibration_file.yaml. If not specified, no data will be loaded, and calibration data will be stored in file:///tmp/calibration_<camera_name>.yaml.